Cambridge IGCSE Physics 0625/62 October/November 2025 (Paper 6 Alternative to Practical): Question-by-Question Guide
Past Papers

Cambridge IGCSE Physics 0625/62 October/November 2025 (Paper 6 Alternative to Practical): Question-by-Question Guide

Mahira Kitchil Project Head, Tutopiya
• 7 min read
Updated

Cambridge IGCSE Physics 0625/62 is the October/November 2025 Paper 6 (Alternative to Practical), variant 2. It lasts 1 hour, is worth 40 marks and is sat by Core and Extended candidates whose school enters them for Paper 6 instead of the practical test. It had four compulsory questions: three experiments worth 11 marks each, where you take readings from diagrams and printed results, and a 7-mark plan. This guide goes through the paper question by question and shows what the official mark scheme gave marks for, including the expected readings. The paper and its mark scheme are free on the Tutopiya Learning Portal.

For the newest series of the same paper, see 0625 Paper 62 May/June 2026: questions and mark scheme.

Paper 6 and Paper 5 share their contexts. The same four investigations appear on 0625/52 (Practical Test), where candidates took the readings themselves. Doing both papers gives you two runs at the same skills.

For an overview of all six 0625 papers from this series, see IGCSE Physics 0625 Oct/Nov 2025 Papers: Topics & Mark Scheme.

0625/62 at a glance

Paper codes: the code printed on the cover is 0625/62/O/N/25, the question paper file is 0625_w25_qp_62 and the mark scheme file is 0625_w25_ms_62.

QuestionTopicMarksMain command word
1Ray trace: reflection in a plane mirror, ratio r = a/b, proportionality11Draw, measure
2Unknown resistor Z: voltmeter reading, current, graph of V against I, gradient11Calculate, plot
3Cooling of hot water: thermometer reading, rates of cooling, estimates11Record, calculate
4Plan: what affects the height a ball reaches on a flexible track7Plan
Total40

Question-by-question walkthrough

Question 1: reflection by a plane mirror (11 marks)

The ray trace was printed full-size. You drew the construction lines on it, measured them and used the student’s results for 20° and 30°.

  • The normal (1 mark): drawn at M by eye, extended to cross PR, with the crossing labelled Q.
  • The incident line (2 marks): at θ = 10° ± 1°, labelled O, and 14.0 cm ± 0.2 cm long. The length is the mark students forget.
  • The reflected ray (1 mark): a line from M through the two crosses, continued to cross PR at T.
  • Measuring a and b (1 mark): a = 1.7 cm and b = 10.3 cm, each ± 0.1 cm.
  • Ratio r (2 marks): r = a ÷ b = 1.7 ÷ 10.3 = 0.165, so 0.17 to 2 significant figures. One mark for the value and one for the significant figures.
  • Is r directly proportional to θ? (2 marks): one mark for a statement matching the results (the scheme expected yes) and one for using the table to justify it. With r = 0.17, 0.33 and 0.50 at 10°, 20° and 30°, r ÷ θ is about 0.017 each time, and doubling θ roughly doubles r.
  • More confidence (1 mark): extend the investigation to more values of θ.
  • A source of inaccuracy (1 mark): for example the reflecting surface being at the back of the mirror, the thickness of the light ray or difficulty finding its centre, a room that is not dark, or small errors in the protractor angle having a large effect on a and b.

Question 2: finding the resistance of Z (11 marks)

The voltmeter was connected across a gap XY in a circuit with resistor Z. Resistors of 10, 22, 39, 47 and 68 Ω went into the gap in turn.

  • Reading V₀ from the meter (1 mark): 4.40 V (4.4 V also accepted).
  • Current with the 10 Ω resistor (2 marks): I = V ÷ R = 1.35 ÷ 10 = 0.135, so 0.14 A to 2 significant figures. One mark for the value and one for the significant figures.
  • The missing voltmeter reading (1 mark): rearrange to V = IR = 0.064 × 47 = 3.0 V (3.01 V also accepted).
  • Graph of V against I from the origin (4 marks): axes labelled with quantity and unit the right way round, suitable scales filling at least half the grid, plots correct to half a small square, and a thin, continuous best-fit line.
  • Gradient G (2 marks): show the triangle on the graph and calculate Δy ÷ Δx (1 mark), using at least half the distance between the end plots, which here means a ΔI of at least 0.045 A (1 mark). The line slopes downwards, because V falls as the current rises.
  • R_Z to the nearest ohm (1 mark): the size of the gradient. Any whole number from 19 Ω to 25 Ω scored.

Question 3: cooling of hot water (11 marks)

Room temperature was given as 21.5 °C. The student poured in hot water, waited 30 s and took readings every minute for 5 minutes.

  • Starting temperature from the thermometer (1 mark): 87.0 °C, to the nearest 0.5 °C.
  • The time column (1 mark): the unit min in the heading and the values 1, 2, 3, 4 and 5.
  • Why wait 30 s (1 mark): to let the thermometer reach the temperature of the water, so the reading has stopped rising.
  • Accurate readings (1 mark): read at eye level, perpendicular to the scale; keep the thermometer off the sides and base; stir before reading; or hold the stopwatch next to the thermometer.
  • Fall in the first two minutes (1 mark): 87.0 − 75.5 = 11.5 °C.
  • Rate R₁ with unit (2 marks): 11.5 ÷ 2 = 5.75 °C/min. One mark for the value and one for the unit.
  • Rate R₂ over the final two minutes (1 mark): (71.0 − 64.0) ÷ 2 = 3.5 °C/min (0.0583 °C/s also accepted).
  • Conclusion (1 mark): the rate of cooling decreases as the temperature falls.
  • After a further 5 minutes (1 mark): any estimate from 45 °C to 55 °C.
  • After a further 50 minutes (1 mark): room temperature, 21.5 °C.

Question 4: planning the flexible track experiment (7 marks)

A ball rolls from rest down one side of a flexible track and up the other, stopping for a moment at height h. You planned how one variable affects h. The seven marking points:

  1. Variable: a valid variable that could affect h, clearly stated.
  2. Apparatus: a ruler or measuring tape, plus whatever measures your variable (not needed if it is the release height or the ball’s diameter).
  3. Method, part 1: measure the independent variable and release the ball.
  4. Method, part 2: measure h and repeat for a new value of the variable.
  5. Control variable: any significant variable suited to your choice.
  6. Table: columns for the independent variable and h, with units in the headings.
  7. Conclusion: compare the readings to see whether and how h changes, or plot a line graph with the axes named.

Where the marks are on 0625/62

  • Drawing on the ray trace carried 4 of the 40 marks, including 2 for the incident line’s angle and length.
  • Readings and completing the table carried 4 marks: a and b, the voltmeter, the thermometer and the time column.
  • Calculations carried 9 marks: the ratio r, the current, the missing voltage, and the temperature fall and two cooling rates. Three of them had separate marks for significant figures or the unit.
  • Graph work carried 7 marks: plotting (4), the gradient (2) and R_Z (1).
  • Conclusions, evaluation and technique carried 9 marks, and the plan carried 7.

How to self-mark 0625/62 with the mark scheme

  1. Check every reading against the scheme’s value. a = 1.7 cm, b = 10.3 cm, V₀ = 4.40 V and 87.0 °C. Practise reading scales to the stated precision.
  2. Check your drawing with a ruler and protractor. The 10° angle had ± 1° and the 14.0 cm line ± 0.2 cm.
  3. Apply ecf. R₁ was marked on your own temperature fall divided by 2, so a wrong reading does not cost the rate mark as well.
  4. Mark significant figures and units separately in 1(d), 2(b)(i) and 3(c)(ii).
  5. Mark the graph point by point: labels with units, scale, plots within half a small square, and a thin best-fit line. Then check your gradient triangle spans at least 0.045 A.
  6. Tick the seven planning points only where you stated them clearly.

Sit 0625/62 as a timed mock

The paper allows 60 minutes for 40 marks, about one and a half minutes per mark. A workable plan:

BlockMarksTime
Question 1 (includes the drawing)1115 minutes
Question 2 (allow time for the graph)1116 minutes
Question 31113 minutes
Question 4711 minutes
Check, especially units and significant figures–5 minutes

Bring a sharp pencil, a 30 cm ruler and a protractor: the drawing in Question 1 and the graph in Question 2 carry 11 marks between them.

0625/62 in other series

Both papers had three 11-mark experiments and a 7-mark plan, and both included an unknown resistor found from a graph, a thermal experiment with rates in °C/min and a plan built around a metal ball. In May/June 2026 the resistor graph was 1/V against R; here it was V against I, and the mirror ray trace replaced the density experiment.

Other October/November 2025 0625 papers

Practise and download

Need help with a 0625 topic? Book a free trial lesson with an IGCSE Physics tutor →

Frequently asked questions

What experiments were on 0625 Paper 62 October/November 2025? +

Four tasks: a ray trace of reflection in a plane mirror with the ratio r = a/b, a circuit to find the resistance of resistor Z from a graph of V against I, the cooling of hot water in a beaker, and a plan for how one variable affects the height a ball reaches on a flexible track.

How many marks is 0625/62 and how long is it? +

It is out of 40 marks and lasts 1 hour. Questions 1, 2 and 3 are worth 11 marks each and the planning question is worth 7.

What was the resistance of Z in 0625/62 Oct/Nov 2025? +

The gradient of the V against I graph gives the resistance of Z to the nearest ohm. The mark scheme accepted any whole number from 19 Ω to 25 Ω. The graph was worth 4 marks and the gradient 2.

What were the rates of cooling in 0625/62 2025? +

The water fell from 87.0 °C to 75.5 °C in the first two minutes, a drop of 11.5 °C, so R₁ = 5.75 °C/min. In the last two minutes it fell from 71.0 °C to 64.0 °C, so R₂ = 3.5 °C/min. The rate of cooling decreases as the water cools.

Who sits 0625/62 instead of Paper 5? +

Core and Extended candidates whose school enters them for the Alternative to Practical rather than the practical test. Paper 5 used the same four investigations in October/November 2025.

Where can I download 0625/62 October/November 2025 and its mark scheme? +

Both are free to download and print on the Tutopiya Learning Portal, on the Cambridge IGCSE Physics 0625 past papers page.

What is 0625_w25_qp_62? +

0625_w25_qp_62 is the file name of the question paper for Cambridge IGCSE Physics 0625 Paper 62 (Paper 6 Alternative to Practical, variant 2), October/November 2025. Its mark scheme is 0625_w25_ms_62, and the code printed on the cover is 0625/62/O/N/25. In these file names, w25 means the October/November 2025 series, qp means question paper and ms means mark scheme.

Ready to Excel in Your Studies?

Get personalised help from Tutopiya's expert tutors. Whether it's IGCSE, IB, A-Levels, or any other curriculum — we match you with the perfect tutor and your first session is free.

Book Your Free Trial
M

Written by

Mahira Kitchil

Connect on LinkedIn →

Project Head, Tutopiya

Mahira Kitchil is a Project Head at Tutopiya, where she works with Cambridge IGCSE and Edexcel A-Level teachers in more than 20 countries on how exams are set and marked. She writes practical guides that help students find the right past papers and use the mark scheme the way examiners do, so every practice paper counts.

Mahira Kitchil on LinkedIn

Get Started

Courses

Company

Subjects & Curriculums

Resources

Book a Tutor

Struggling with this topic?

Practise IGCSE Physics with free topic quizzes