Cambridge AS & A Level Chemistry 9701/12 October/November 2025 (Paper 1 Multiple Choice): Question-by-Question Guide
Cambridge AS & A Level Chemistry 9701/12 is the October/November 2025 Paper 1 (Multiple Choice), variant 2. It has 40 questions worth one mark each, lasts 1 hour 15 minutes and tests the AS content. Organic chemistry was the biggest area, with 15 questions, and five questions needed a numerical answer, from a rate of reaction to a volume of hydrogen. This guide gives the official answer for every question, the topic it tested and the working for each calculation. The paper and its mark scheme are free on the Tutopiya Learning Portal.
For the newest series of the same paper, see 9701 Paper 12 May/June 2026: questions and mark scheme.
9701/12 at a glance
Paper codes: the code printed on the cover is 9701/12/O/N/25, the question paper file is 9701_w25_qp_12 and the mark scheme file is 9701_w25_ms_12.
| Syllabus area | Questions | Number of questions |
|---|---|---|
| Atomic structure, moles and the gas laws | 1–4, 8 | 5 |
| Chemical bonding | 5–7 | 3 |
| Chemical energetics | 9–10 | 2 |
| Redox | 11 | 1 |
| Equilibria | 12–13 | 2 |
| Reaction kinetics | 14–15 | 2 |
| Nitrogen and sulfur | 16, 24 | 2 |
| Period 3 | 17, 18, 23 | 3 |
| Group 2 | 19–20 | 2 |
| Group 17 | 21–22 | 2 |
| Organic chemistry | 25–39 | 15 |
| Infrared spectroscopy | 40 | 1 |
| Total | 40 |
Each correct answer scores one mark, so the total is 40. The paper prints the Periodic Table and the important constants, including R = 8.31 J K⁻¹ mol⁻¹, a molar gas volume of 24.0 dm³ mol⁻¹ at room conditions and c = 4.18 J g⁻¹ K⁻¹ for water.
Answer key and topic for every question
| Question | What it tested | Answer |
|---|---|---|
| 1 | Electrons in boxes for Fe³⁺ | D |
| 2 | Equation for the first ionisation energy of bromine | A |
| 3 | Moles of H₂S needed to make 1 mol of sulfur | B |
| 4 | Relative atomic, isotopic, molecular and formula mass | C |
| 5 | σ bond and lone pair orbitals in N₂ | B |
| 6 | Order of three bond angles in HSCH₂CH₂NH₂ | C |
| 7 | Structure of two Period 3 elements from their electron arrangement | B |
| 8 | Expression for Mr from a gas density | D |
| 9 | Expression for the energy absorbed by water | C |
| 10 | Reaction in an iron heat pad | D |
| 11 | Highest average oxidation number of sulfur | D |
| 12 | New equilibrium concentration after adding Q | B |
| 13 | Statements about the Contact and Haber processes | D |
| 14 | Average rate of decomposition of hydrogen peroxide | B |
| 15 | Reaction pathway for a two-step endothermic reaction | C |
| 16 | Nitrogen oxides in photochemical smog and acid rain | A |
| 17 | Atomic and ionic radii of sodium and sulfur | D |
| 18 | White Period 3 oxide that gives an acidic solution | D |
| 19 | Equation for the thermal decomposition of magnesium nitrate | C |
| 20 | Anion that precipitates with Sr²⁺ but not with acid | B |
| 21 | Mass of NaClO₃ from 0.600 mol of chlorine | A |
| 22 | Sodium halides and concentrated sulfuric acid | A |
| 23 | Period 3 element with an amphoteric hydroxide from its chloride | B |
| 24 | Mixtures that produce ammonia | A |
| 25 | Shape and σ bonds of methanal | A |
| 26 | Chiral centres in disodium cromoglycate | A |
| 27 | Major product of 2-methylpent-2-ene with HBr | B |
| 28 | Pent-2-ene with cold, dilute acidified manganate(VII) | A |
| 29 | Limonene with excess bromine | D |
| 30 | Reaction that produces a nitrile | A |
| 31 | Reaction classified as SN1 | C |
| 32 | Reaction that gives a primary alcohol | C |
| 33 | Oxidising HOCH₂CHO under reflux | C |
| 34 | Product of CH₃CH₂Li with pentan-2-one | B |
| 35 | Tests on a steroid before and after oxidation | B |
| 36 | Single-step starting material for propanoic acid | C |
| 37 | Gas volumes from four acid reactions | C |
| 38 | Volume of hydrogen to reduce butanenitrile | D |
| 39 | Monomer of a polymer with ester side groups | A |
| 40 | Infrared evidence that no propene remains | D |
What the paper tested, topic by topic
Atomic structure, moles and the gas laws (Questions 1–4 and 8)
- Fe³⁺ (Question 1): iron loses its two 4s electrons and one 3d electron, leaving [Ar]3d⁵ with five unpaired 3d electrons and an empty 4s box.
- First ionisation energy (Question 2): one mole of gaseous atoms losing one electron each: Br(g) → Br⁺(g) + e⁻. The options starting from ½Br₂ include atomisation, and the Br⁻ options describe a different process.
- Combining half-equations (Question 3): H₂S gives 2 electrons and SO₂ takes 4, so 2H₂S + SO₂ → 3S + 2H₂O. To make 1 mol of sulfur you need ⅔ mol of H₂S.
- Relative masses (Question 4): only C is right: CaCO₃ = 40.1 + 12.0 + 3(16.0) = 100.1. Mr of O₂ is 32.0, and 35.5 and 24.3 are relative atomic masses of the elements, not isotopic masses of single isotopes.
- Gas density (Question 8): rearranging pV = (m/M)RT gives M = ρRT ÷ p. The density must be in g m⁻³ (multiply by 1000, or divide the pressure by 1000) and the temperature in kelvin (298 K), so the expression is 2.62 × 8.31 × 298 ÷ (101 000 × 0.001). It works out at about 64.
Chemical bonding (Questions 5–7)
- N₂ orbitals (Question 5): the σ bond forms from an sp orbital on each nitrogen overlapping end-on, and each lone pair sits in the other sp orbital.
- Bond angles (Question 6): y is at a carbon with four bonding pairs (about 109.5°), z is at nitrogen with one lone pair (about 107°) and x is at sulfur with two lone pairs (about 104.5°). The order is y > z > x.
- Electron arrangement (Question 7): in Period 3, only magnesium (3s²) and sulfur (3p⁴) have exactly one full orbital in their highest occupied sub-shell. Sulfur has the higher first ionisation energy, so X is magnesium (giant metallic) and Y is sulfur (simple molecular).
Energetics, redox, equilibria and kinetics (Questions 9–15)
- Energy absorbed (Question 9): q = mcΔT = 200 × 4.18 × 17.3, using the mass of water (not the 0.47 g of fuel) and the temperature change of 41.0 − 23.7 = 17.3 °C. Adding 273 to a temperature change is the trap.
- Heat pad (Question 10): the pad gets hotter, so the reaction is exothermic, and iron is oxidised, so it loses electrons.
- Oxidation numbers (Question 11): S₈ is 0, Na₂S₂O₃ is +2, Na₂S₄O₆ averages +2.5 and SO₂Cl₂ is +6.
- Adding Q (Question 12): Q rises to 15 mol dm⁻³ at first, then the equilibrium shifts right and uses some of it up, so the new concentration is between 10 and 15 mol dm⁻³.
- Contact and Haber (Question 13): a catalyst such as V₂O₅ does not change the position of equilibrium. Kp for the Haber process has units, Kp changes only with temperature, and the Haber process uses a heterogeneous iron catalyst.
- Rate (Question 14): 160 cm³ of O₂ ÷ 24 000 = 6.67 × 10⁻³ mol. From 2H₂O₂ → 2H₂O + O₂, twice as much H₂O₂ reacts: 1.33 × 10⁻² mol. Over 5.00 minutes (300 s), the rate is 4.44 × 10⁻⁵ mol s⁻¹. Option A forgets the 2 : 1 ratio.
- Pathway diagram (Question 15): the products end higher than the reactants (endothermic), there are two humps (two steps) and the second hump rises only a little above the intermediate, so the second step has the smaller activation energy and is faster: diagram C. Diagram D is endothermic, but its second step has the larger activation energy.
Inorganic chemistry (Questions 16–24)
- NOₓ (Question 16): both NO and NO₂ are involved in both photochemical smog and acid rain: all four ticks.
- Radii (Question 17): a sodium atom is larger than a sulfur atom (lower nuclear charge across the period), but the S²⁻ ion is larger than the Na⁺ ion, which has lost its outer shell.
- Oxides (Question 18): phosphorus(V) oxide is a white solid that reacts with water to give an acidic solution. Silicon dioxide does not react with water and sulfur dioxide is a gas.
- Magnesium nitrate (Question 19): 2Mg(NO₃)₂ → 2MgO + 4NO₂ + O₂.
- Anion test (Question 20): a white precipitate with Sr²⁺ and no reaction with dilute nitric acid points to sulfate. Carbonate and hydrogencarbonate would fizz with the acid.
- Disproportionation (Question 21): 3Cl₂ + 6NaOH → 5NaCl + NaClO₃ + 3H₂O, so 0.600 mol of Cl₂ gives 0.200 mol of NaClO₃. 0.200 × 106.5 = 21.3 g.
- Halides and sulfuric acid (Question 22): only iodide reduces sulfuric acid as far as H₂S, so X is sodium iodide, and Y (no change in sulfur’s oxidation number) is sodium chloride. Iodide ions reduce aqueous bromine. Silver chloride does dissolve in concentrated ammonia, and making H₂S needs eight iodide ions per sulfur atom, not six.
- Chloride and water (Question 23): aluminium chloride gives steamy HCl fumes and a white precipitate of aluminium hydroxide, which is amphoteric, so it dissolves in both NaOH(aq) and HCl(aq).
- Ammonia (Question 24): an ammonium salt with a base releases ammonia: NaOH, Ba(OH)₂ and Na₂O (which forms NaOH in water) all work, so 1, 2 and 3. Hydrochloric acid does not.
Organic chemistry (Questions 25–39)
- Methanal (Question 25): H₂C=O is planar and has three σ bonds (two C–H and the σ part of C=O), so both statements are correct.
- Chiral centres (Question 26): none. The only candidate, the CH(OH) carbon, has two identical –CH₂O– groups attached, because the molecule is symmetrical.
- HBr addition (Question 27): the more stable tertiary carbocation forms on carbon 2, giving 2-bromo-2-methylpentane.
- Mild oxidation (Question 28): cold, dilute acidified manganate(VII) adds two OH groups across the double bond: pentane-2,3-diol, CH₃CH₂CH(OH)CH(OH)CH₃. Option D is what hot, concentrated manganate(VII) gives.
- Limonene (Question 29): with excess bromine, both C=C bonds react, giving the product with four bromine atoms (D).
- Nitriles (Questions 30 and 38): a halogenoalkane with KCN in ethanol gives a nitrile. In Question 38, butanenitrile (C₃H₇CN, Mr 69.0) is reduced with 2 mol of H₂ per mole: 0.500 ÷ 69.0 = 7.25 × 10⁻³ mol, so 1.45 × 10⁻² mol of H₂, and 1.45 × 10⁻² × 24 000 = 348 cm³. Answer B (174 cm³) uses only 1 mol of H₂.
- SN1 (Question 31): a tertiary halogenoalkane, 2-chloro-2-methylpropane, with potassium cyanide in ethanol. With potassium hydroxide in ethanol, the main reaction is elimination, and the 1-chloropropane options are primary.
- Primary alcohol (Question 32): butanoic acid reduced by LiAlH₄ gives butan-1-ol. Propanone with NaBH₄ and propene with steam give propan-2-ol, a secondary alcohol.
- Full oxidation (Question 33): heating under reflux with excess dichromate oxidises both the CH₂OH and the CHO groups to carboxylic acids: HOOCCOOH.
- Organolithium (Question 34): the ethyl anion attacks the carbonyl carbon of pentan-2-one, and protonation gives the tertiary alcohol 3-methylhexan-3-ol (B).
- Steroid tests (Question 35): compound Q has an aldehyde group, so it gives a red precipitate with Fehling’s reagent, and it has no CH₃CO– or CH₃CH(OH)– group, so there is no reaction with alkaline iodine. After oxidation, R still has ketone groups, so it gives an orange precipitate with 2,4-DNPH, and still no iodoform reaction.
- Propanoic acid (Question 36): oxidising propanal gives propanoic acid in one step. Ethanenitrile and propyl ethanoate give ethanoic acid on hydrolysis, and propan-2-ol oxidises to a ketone.
- Gas volumes (Question 37):
| Reaction | Groups that react | Gas per mole |
|---|---|---|
| Z: CH(OH)(COOH)CH₂COOH + Na | one OH and two COOH | 1.5 mol H₂ |
| W: (CH₂COOH)₂ + Na | two COOH | 1 mol H₂ |
| X: CH₃CH(OH)CH₂COOH + Na₂CO₃ | one COOH | 0.5 mol CO₂ |
| Y: CH₃CH(OH)CH₂COOH + NaOH | neutralisation only | no gas |
The order is Z, W, X, Y.
- Polymer (Question 39): each repeat unit is –CH₂–CH(OCOCH₃)–, so the monomer is ethenyl ethanoate, CH₃COOCH=CH₂ (A). Option B, methyl propenoate, would put the C=O group directly on the polymer chain.
Infrared spectroscopy (Question 40)
- Checking for propene (Question 40): the table gives C=C at 1500–1680 cm⁻¹, so no absorption at or near 1550 cm⁻¹ shows that no propene remains. C–H absorption near 2900 cm⁻¹ appears in both compounds, so it proves nothing.
Where the marks are on 9701/12
- Organic chemistry carried 15 marks, more than a third of the paper, with three questions on chemical tests (33, 35 and 36) and two on nitriles (30 and 38).
- Inorganic chemistry carried 9 marks (Questions 16 to 24), across Period 3, Group 2, Group 17, nitrogen and sulfur.
- Five questions needed a numerical answer: 3, 14, 21, 37 and 38. Two more, Questions 8 and 9, asked you to pick the right expression, and Question 11 needed oxidation numbers.
- Mole ratios decided four questions. Questions 3, 14, 21 and 38 all turned on the ratio in an equation, and each had a distractor for using the wrong ratio.
- Eight questions were built on a structure or diagram: 1, 6, 15, 26, 29, 34, 35 and 39. Read every bond in the structure before you look at the options.
How to self-mark 9701/12 with the mark scheme
- Check each answer against the key above or the official mark scheme. Count one mark per correct letter.
- Tag every wrong answer by topic, using the at-a-glance table, to see which area is costing the most.
- Tag it by reason too: knowledge (for example, cold dilute manganate(VII) gives a diol), misread (missing “excess” in Questions 29 and 33, or “single reaction” in 36) or working (a wrong mole ratio in 14 or 38, or forgetting kelvin in 8).
- Redo the five numerical questions with full working and units, and check that your answer matches the key without guessing between options.
- Revise knowledge gaps first, then practise the statement and table questions by marking each part true or false before choosing a letter.
Sit 9701/12 as a timed mock
You have 75 minutes for 40 questions, just under two minutes each. Use two passes: answer the recall questions first, mark any that need a calculation or a careful look at a structure, then come back to them.
| Block | Questions | Time |
|---|---|---|
| Atoms, bonding and the gas expression | 1–8 | 14 minutes |
| Energetics, redox, equilibria and kinetics | 9–15 | 12 minutes |
| Inorganic chemistry | 16–24 | 13 minutes |
| Organic: mechanisms and reactions | 25–32 | 13 minutes |
| Organic: oxidation, tests, gas volumes and IR | 33–40 | 15 minutes |
| Second pass and check the answer sheet | – | 8 minutes |
The last block is longest because it holds two calculations (37 and 38) and the steroid test question.
9701/12 in other series
The May/June 2026 paper also gave 15 questions to organic chemistry and followed a similar order of topics. Several question types came back: an ideal gas calculation in Question 8, the thermal decomposition of a Group 2 nitrate, making ammonia from an ammonium salt in Question 24, a nitrile question in Question 30, and a Fehling’s test before and after oxidising a compound with an aldehyde group.
Practise and download
- Download 9701/12 and its mark scheme on the Learning Portal →
- All 9701 May/June 2026 papers: overview and marking patterns
- Try a free A Level Chemistry quiz
Need help with a 9701 topic? Book a free trial lesson with an A Level Chemistry tutor →
Frequently asked questions
What topics were on 9701 Paper 12 October/November 2025? +
All of the AS content. Organic chemistry had 15 of the 40 questions. Atomic structure and moles had 5, bonding and Period 3 had 3 each, energetics, equilibria, kinetics, Group 2, Group 17 and nitrogen and sulfur had 2 each, and redox and infrared spectroscopy had 1 each.
How many marks is 9701/12 and how long is it? +
It has 40 multiple choice questions, one mark each, for a total of 40 marks. You have 1 hour 15 minutes and you may use a calculator. The Periodic Table and a list of constants are printed in the paper.
What was the answer to the hydrogen volume question on 9701/12 Oct/Nov 2025? +
D, 348 cm³. Butanenitrile, C₃H₇CN, has Mr 69.0, so 0.500 g is 0.00725 mol. Reducing a nitrile to an amine uses 2 mol of hydrogen per mole, so 0.0145 mol of H₂ is needed, and 0.0145 × 24 000 = 348 cm³ at room conditions.
What was the answer to the NaClO₃ mass question on 9701/12? +
A, 21.3 g. Chlorine and hot sodium hydroxide react as 3Cl₂ + 6NaOH → 5NaCl + NaClO₃ + 3H₂O, so 0.600 mol of Cl₂ gives 0.200 mol of NaClO₃. With Mr 106.5, that is 21.3 g.
Is 9701/12 an AS or A Level paper? +
Paper 1 tests the AS content. It is sat by AS candidates with Papers 2 and 3, and by full A Level candidates, who also take Papers 4 and 5.
Where can I download 9701/12 October/November 2025 and its mark scheme? +
Both are free to download and print on the Tutopiya Learning Portal, on the Cambridge AS & A Level Chemistry 9701 past papers page.
What is 9701_w25_qp_12? +
9701_w25_qp_12 is the file name of the question paper for Cambridge AS & A Level Chemistry 9701 Paper 12 (Paper 1 Multiple Choice, variant 2), October/November 2025. Its mark scheme is 9701_w25_ms_12, and the code printed on the cover is 9701/12/O/N/25. In these file names, w25 means the October/November 2025 series, qp means question paper and ms means mark scheme.
Ready to Excel in Your Studies?
Get personalised help from Tutopiya's expert tutors. Whether it's IGCSE, IB, A-Levels, or any other curriculum — we match you with the perfect tutor and your first session is free.
Book Your Free TrialWritten by
Mahira Kitchil
Connect on LinkedIn →Project Head, Tutopiya
Mahira Kitchil is a Project Head at Tutopiya, where she works with Cambridge IGCSE and Edexcel A-Level teachers in more than 20 countries on how exams are set and marked. She writes practical guides that help students find the right past papers and use the mark scheme the way examiners do, so every practice paper counts.
Related Articles
A Level Biology 9700 Oct/Nov 2025 Papers & Mark Schemes
Free 9700 Oct/Nov 2025 Paper 1 and Paper 3 with mark schemes: the topics tested, the practical tasks and how examiners awarded marks on each.
A Level Computer Science 9618 Oct/Nov 2025 Papers & Marking
Free 9618 Oct/Nov 2025 papers and mark schemes, plus a paper-by-paper breakdown of Papers 1 to 4 and how examiners gave marks for code and theory.
A Level Geography 9696 Oct/Nov 2025 Papers: Topics & Mark Scheme
Free 9696 Oct/Nov 2025 papers, inserts and mark schemes, plus a paper-by-paper breakdown of the data questions, options and essays and how they were levelled.
