Cambridge IGCSE Chemistry 0620/42 October/November 2025 (Paper 4 Extended Theory): Question-by-Question Guide
Past Papers

Cambridge IGCSE Chemistry 0620/42 October/November 2025 (Paper 4 Extended Theory): Question-by-Question Guide

Mahira Kitchil Project Head, Tutopiya
• 8 min read
Updated

Cambridge IGCSE Chemistry 0620/42 is the October/November 2025 Paper 4 (Extended Theory), variant 2. It lasts 1 hour 15 minutes, is worth 80 marks and is sat by every Extended candidate. It had six compulsory questions worth between 8 and 19 marks, and the biggest, on iron, ran from the blast furnace through isotopes and ions to redox. This guide goes through the paper question by question and shows what the official mark scheme gave marks for. The paper and its mark scheme are free on the Tutopiya Learning Portal.

For the newest series of the same paper, see 0620 Paper 42 May/June 2026: questions and mark scheme.

For an overview of all six 0620 papers from this series, see IGCSE Chemistry 0620 Oct/Nov 2025 Papers: Topics & Marking.

0620/42 at a glance

Paper codes: the code printed on the cover is 0620/42/O/N/25, the question paper file is 0620_w25_qp_42 and the mark scheme file is 0620_w25_ms_42.

QuestionTopicMarksMain command word
1States of matter, changes of state, diffusion, oxides of nitrogen13Complete, name
2Iron: blast furnace equations, isotopes, Fe²⁺ and Fe³⁺, oxidising agents19State, write
3Preparing barium sulfate by precipitation: moles, volume, method13Calculate, state
4Strong and weak acids, ions, electrolysis, bases, oxidation number15State, explain
5Alkanes: characteristics, trends, substitution of propane, isomers12Describe, give
6Ethyl butanoate: ester link, empirical formula, isomers, combustion8Name, deduce
Total80

Question-by-question walkthrough

Question 1: states of matter and nitrogen oxides (13 marks)

  • Completing the particle table (3 marks): solid particles have a regular (uniform) arrangement and vibrate; liquid particles are touching, with a random arrangement and random motion; gas particles are far apart.
  • Naming the changes (3 marks): solid to liquid is melting, gas to liquid is condensing, and solid to aqueous is dissolving.
  • Why gases diffuse (1 mark): because of the motion of the particles. The word “particles” is in bold in the scheme.
  • What decides the relative rate of diffusion at constant temperature (1 mark): the relative molecular mass of the gas.
  • Two other effects of nitrogen oxides (2 marks): photochemical smog and respiratory problems.
  • The toxic product of incomplete combustion (1 mark): carbon monoxide.
  • The two non-toxic gases from the catalytic converter (2 marks): nitrogen and carbon dioxide.

Question 2: iron (19 marks)

  • The main iron ore (1 mark): hematite.
  • The main source of heat (1 mark): burning carbon (coke).
  • The gaseous reducing agent (1 mark): carbon monoxide.
  • Reducing iron(III) oxide (2 marks): Fe₂O₃ + 3CO → 2Fe + 3CO₂. M1 is for the right species and M2 for the balanced equation.
  • How limestone removes silicon(IV) oxide (2 marks): CaCO₃ → CaO + CO₂, then CaO + SiO₂ → CaSiO₃.
  • Why A to D are isotopes (2 marks): atoms of the same element with the same number of protons (M1) but different numbers of neutrons (M2).
  • Particles in ⁵⁴Fe²⁺ and ⁵⁸Fe³⁺ (3 marks): both have 26 protons; the neutrons are 28 and 32; the electrons are 24 and 23. Remember that the charge comes from losing electrons, so subtract 2 or 3 from 26.
  • Test for aqueous Fe²⁺ (2 marks): add aqueous sodium hydroxide or aqueous ammonia; a green precipitate forms. The scheme adds, in brackets, that it is insoluble in excess and turns brown near the surface on standing.
  • What an oxidising agent is (2 marks): a substance that oxidises another substance (M1) and is itself reduced (M2).
  • Why Fe²⁺ to Fe³⁺ is oxidation (1 mark): it is a loss of an electron.
  • The condition for potassium manganate(VII) to work (1 mark): it must be acidified.
  • The other product when iodide ions reduce Fe³⁺ (1 mark): iodine.

Question 3: making barium sulfate (13 marks)

A student dissolved 0.100 mol of barium chloride, added 0.100 mol of sodium sulfate solution, then stirred, filtered and dried the solid.

  • Completing the equation (2 marks): BaCl₂(aq) + Na₂SO₄(aq) → BaSO₄**(s)** + 2NaCl(aq). M1 is for 2NaCl and M2 for both state symbols.
  • Mass of BaCl₂ (2 marks): Mr = 137 + (2 × 35.5) = 208 (M1); 208 × 0.100 = 20.8 g (M2).
  • Volume of Na₂SO₄ solution (1 mark): 0.100 ÷ 1.25 = 0.080 dm³ = 80 cm³.
  • Colour of the solid (1 mark): white.
  • The solid left in the filter paper (1 mark): the residue.
  • The missing step and why the mass was too high (2 marks): rinse the residue with water (M1), because otherwise solid sodium chloride stays in the residue and adds to its mass (M2).
  • The method (1 mark): precipitation.
  • Three alternative salts (3 marks): a different soluble barium salt, such as barium nitrate; a different soluble sulfate, such as potassium or ammonium sulfate; and a different insoluble barium salt this method could make, such as barium carbonate.

Question 4: acids and bases (15 marks)

  • The common cation (1 mark): H⁺.
  • Strong against weak (2 marks): nitric acid is completely dissociated; ethanoic acid is partially dissociated.
  • The highest pH (1 mark): ethanoic acid, because it is weak and releases fewer H⁺ ions.
  • Thymolphthalein in all three acids (1 mark): colourless.
  • The anions (2 marks): SO₄²⁻ from sulfuric acid and CH₃COO⁻ from ethanoic acid.
  • Electrolysis of dilute sulfuric acid (2 marks): hydrogen and oxygen.
  • Calcium with ethanoic acid (1 mark): calcium ethanoate.
  • What a base is (1 mark): a proton acceptor.
  • What “not an alkali” says about Al(OH)₃ (1 mark): it is insoluble in water.
  • Another compound that gives aluminium nitrate with nitric acid (1 mark): aluminium oxide.
  • Oxidation number of N in Al(NO₃)₃ (2 marks): the nine oxygen atoms give 9 × (−2) = −18 (M1). Then +3 + 3N − 18 = 0, so 3N = 15 and N = +5 (M2).

Question 5: alkanes (12 marks)

  • Two other characteristics of a homologous series (2 marks): they share the general formula CₙH₂ₙ₊₂ and each member differs from the next by a –CH₂– unit.
  • Boiling point trend (1 mark): it increases as the chain gets longer.
  • Another physical property with a trend (2 marks): M1 for naming a physical property and M2 for how it changes as the chain length increases.
  • Why alkanes are saturated (1 mark): all the carbon–carbon bonds are single bonds.
  • The condition for substitution with chlorine (1 mark): ultraviolet light.
  • The two monosubstituted products (4 marks): CH₃CH₂CH₂Cl, 1-chloropropane, and CH₃CHClCH₃, 2-chloropropane. Each structural formula and each name is a separate mark.
  • What structural isomers are (1 mark): compounds with the same molecular formula but different structural formulae.

Question 6: esters (8 marks)

  • Circling the ester linkage (1 mark): the circle must include two carbon atoms and two oxygen atoms, the C(=O)–O–C group.
  • Naming compound E (1 mark): ethyl butanoate.
  • Empirical formula (1 mark): ethyl butanoate is C₆H₁₂O₂, which simplifies to C₃H₆O.
  • The two starting compounds (2 marks): butanoic acid and ethanol.
  • A catalyst (1 mark): an acid.
  • Unbranched esters with formula C₅H₁₀O₂ (1 mark): 4. They are methyl butanoate, ethyl propanoate, propyl ethanoate and butyl methanoate.
  • Complete combustion (1 mark): 2C₅H₁₀O₂ + 13O₂ → 10CO₂ + 10H₂O. Check the oxygen: 4 + 26 = 30 on the left and 20 + 10 = 30 on the right.

Where the marks are on 0620/42

  • Recall answers (state, name, give) carried 39 of the 80 marks, from hematite and carbon monoxide to the names of salts, gases and products.
  • Writing equations and completing tables carried 13 marks: the blast furnace and limestone equations, the barium sulfate equation, the combustion equation, the particle table and the ion table.
  • Explain, describe and define carried 16 marks, including the definitions of isotopes, oxidising agent, base and structural isomers, and strong against weak acids.
  • Calculations carried 7 marks: the BaCl₂ mass, the Na₂SO₄ volume, the oxidation number of nitrogen, the empirical formula and the count of isomers.
  • “Suggest” carried 4 marks and drawing 1: the iodine product, the washing step, the acid catalyst and the circled ester link.
  • Question 2 alone is worth 19 marks. Iron chemistry, redox and isotopes are worth securing first for this paper.

How to self-mark 0620/42 with the mark scheme

  1. Learn the layout. M1, M2 and so on are the separate marking points, a slash separates alternatives for the same point, and words in brackets are not needed for the mark. This mark scheme gives the expected answers without long accept or reject lists, so check your wording against the chemistry it gives.
  2. Mark calculations step by step. In 3(b) the Mr and the mass are separate marks, and in 4(b)(iv) using −18 for the oxygen earns M1 even if the final value is wrong. The general rules also allow error carried forward.
  3. Check every equation for species and balancing. In 2(a)(iv), the right species earn M1 even if the balancing is wrong. In 3(a), state symbols are a separate mark.
  4. Check names and formulae closely. 1-chloropropane and 2-chloropropane, ethyl butanoate (not butyl ethanoate) and calcium ethanoate all need the right order and spelling.
  5. Apply the list rule. For “state two” in 1(d), mark only your first two answers. A wrong answer still uses up a place.
  6. Log each lost mark as missing knowledge, a misread command word or a careless slip, and revise in that order.

Sit 0620/42 as a timed mock

The paper allows 75 minutes for 80 marks, a little under one minute per mark. A workable plan:

BlockMarksTime
Question 11312 minutes
Question 21917 minutes
Question 31312 minutes
Question 41514 minutes
Question 51211 minutes
Question 686 minutes
Check, especially equations, charges and state symbols–3 minutes

Write your working on the lines for every calculation in Questions 3 and 4, so each step can earn its own mark.

0620/42 in other series

Both this paper and May/June 2026 prepared an insoluble salt by precipitation and tested washing the solid before drying it, both used potassium manganate(VII) as an oxidising agent, and both ended with esters. The weighting moved: this paper’s biggest question was on iron (19 marks), while in 2026 it was on nitrogen compounds (21 marks).

Other October/November 2025 0620 papers

Practise and download

Need help with a 0620 topic? Book a free trial lesson with an IGCSE Chemistry tutor →

Frequently asked questions

What topics were on 0620 Paper 42 October/November 2025? +

Six questions: states of matter, diffusion and oxides of nitrogen; the blast furnace, iron isotopes and ions, and redox; preparing barium sulfate by precipitation; strong and weak acids, bases and oxidation numbers; alkanes and the substitution of propane with chlorine; and the ester ethyl butanoate.

How many marks is 0620/42 and how long is it? +

It is out of 80 marks and lasts 1 hour 15 minutes. Question 2, on iron, is the biggest at 19 marks, and Question 6, on esters, is the smallest at 8.

What were the calculation answers on 0620/42 Oct/Nov 2025? +

The mass of 0.100 mol of BaCl₂ was 20.8 g (Mr 208), the volume of 1.25 mol/dm³ Na₂SO₄ containing 0.100 mol was 80 cm³, the oxidation number of nitrogen in Al(NO₃)₃ was +5, and the empirical formula of ethyl butanoate was C₃H₆O.

Why was the mass of barium sulfate too high in 0620/42 2025? +

The student did not rinse the residue with water before drying it. Sodium chloride from the solution stayed in the solid and added to its mass. The 2 marks were for the rinsing step and for that explanation.

Is 0620/42 the Core or Extended paper? +

Extended. Paper 4 is the Extended theory paper, sat alongside Paper 2 (Extended multiple choice) and either Paper 5 or Paper 6. Core candidates sit Paper 3 instead.

Where can I download 0620/42 October/November 2025 and its mark scheme? +

Both are free to download and print on the Tutopiya Learning Portal, on the Cambridge IGCSE Chemistry 0620 past papers page.

What is 0620_w25_qp_42? +

0620_w25_qp_42 is the file name of the question paper for Cambridge IGCSE Chemistry 0620 Paper 42 (Paper 4 Extended Theory, variant 2), October/November 2025. Its mark scheme is 0620_w25_ms_42, and the code printed on the cover is 0620/42/O/N/25. In these file names, w25 means the October/November 2025 series, qp means question paper and ms means mark scheme.

Ready to Excel in Your Studies?

Get personalised help from Tutopiya's expert tutors. Whether it's IGCSE, IB, A-Levels, or any other curriculum — we match you with the perfect tutor and your first session is free.

Book Your Free Trial
M

Written by

Mahira Kitchil

Connect on LinkedIn →

Project Head, Tutopiya

Mahira Kitchil is a Project Head at Tutopiya, where she works with Cambridge IGCSE and Edexcel A-Level teachers in more than 20 countries on how exams are set and marked. She writes practical guides that help students find the right past papers and use the mark scheme the way examiners do, so every practice paper counts.

Mahira Kitchil on LinkedIn

Get Started

Courses

Company

Subjects & Curriculums

Resources

Book a Tutor

Struggling with this topic?

Practise IGCSE Chemistry with free topic quizzes