Zeroing the balance in a magnetic-force experiment
A student plans to investigate how the force on a current-carrying wire depends on the current . A U-shaped magnet stands on a top-pan balance. A stiff horizontal copper wire is clamped between the poles of the magnet so that it does not touch the magnet. When there is a current in the wire, the balance reading changes, and the student will calculate the force from the change in reading.
Describe how the student should set the balance before switching on the current, and explain why this is necessary. (2)
- 1
With the magnet on the balance, the wire clamped in position and no current in the wire, press the tare (zero) button so that the balance reads zero (or record this reading and subtract it from every later reading) (1)
- 2
The reading with a current is then only the change caused by the magnetic force on the magnet (equal and opposite to the force on the wire), so (the change in reading, converted to kg) with no contribution from the weight of the magnet; this removes a systematic (zero) error (1)
- 3
Not credited. "Make sure the balance is accurate" or "check it is working" with no description of setting it to zero with the magnet in place and no current.
Answer
With the magnet on the balance and no current, tare the balance to zero (or record the reading). Then any reading with a current is caused only by the magnetic force, , with no zero error.
Examiner tip
The zeroing must be done with the magnet already on the balance and the current switched off; taring an empty balance leaves the magnet's weight in every reading. The balance can show a negative reading if the force on the magnet is upwards: that is the force, not a fault. "Accurate" alone never earns the reason mark; name the systematic error that is removed.