Reading an analogue voltmeter with a mirror scale
A student measures the potential difference across a resistance wire with an analogue voltmeter. Figure 1 shows the face of the meter. A strip of mirror runs alongside the scale.
(a) State the reading on the voltmeter. (1)
(b) State how the student should use the mirror when taking the reading. (1)
- 1
(a) There are ten small divisions between each labelled value, so one small division is 0.1 V. The needle is on the fourth small division after 2: the reading is (accept 2.40 V) (1)
- 2
(b) Move the head until the needle covers its own image in the mirror (the needle and its reflection are in line), then read the scale. The eye is then directly in front of the needle, so there is no parallax error (1)
Answer
(a) (accept ). (b) Line the needle up with its image in the mirror, so the image is hidden behind the needle, then read the scale.
Examiner tip
Work out the value of one small division before reading the scale: here 1 V is split into ten, so each division is 0.1 V. The reading needs its unit. In (b), 'look straight at the needle' is weaker than the technique the question asks about; the mark is for lining the needle up with its reflection, which is what places the eye perpendicular to the scale.