Define capacitance
Define capacitance in terms of charge and potential difference .
- 1
Answer
. SI unit: farad (F) = C V⁻¹.
Examiner tip
A capacitor stores charge in proportion to the applied voltage. The ratio is capacitance.
Launching your learning experience…
Cambridge International AS & A Levels Physics 9702 · Standard · Syllabus 2025-2027
Exam-style 9702 practice on capacitance: ; parallel-plate formulae; series () and parallel () combinations. Items span definitions (Foundation), direct calculations (Standard), and multi-capacitor networks (Challenge). Syllabus 19.1 (2025–2027).
This page has 10 exam-style A Level Physics 9702 capacitors and capacitance worked examples — 3 Foundation, 4 Standard and 3 Challenge. Each one shows the full method step by step, the final answer in the form a marker expects, and an examiner tip on where marks are commonly lost.
Define capacitance in terms of charge and potential difference .
Answer
. SI unit: farad (F) = C V⁻¹.
Examiner tip
A capacitor stores charge in proportion to the applied voltage. The ratio is capacitance.
A capacitor is connected to a battery. Find the charge stored.
Answer
.
Examiner tip
Fundamental equation of capacitance. Mind the unit prefixes: F × V = C.
A capacitor stores at . Find its capacitance.
Answer
.
Examiner tip
1 F is a huge capacitance; typical values are F, nF, pF.
Two capacitors, and , are connected in series. Find the total capacitance.
Answer
.
Examiner tip
Series: reciprocal addition (like resistors in parallel). Total < smallest capacitor.
Two capacitors, and , are connected in parallel. Find the total.
Answer
.
Examiner tip
Parallel: direct addition (like resistors in series).
A and capacitor in series are connected across . Find:
(a) total .
(b) charge on each.
(c) voltage across each.
(a)
(b) In series: same charge on each.
(c)
Answer
(a) . (b) on each. (c) , . (Check: ✓).
Examiner tip
In series: smaller capacitor gets larger voltage. .
A and capacitor in parallel are connected across . Find:
(a) total .
(b) charge on each.
(c) total charge.
(a)
(b) Each has same V.
(c)
Answer
(a) . (b) , . (c) ✓.
Examiner tip
In parallel: larger capacitor stores more charge. .
A in series with a parallel combination of and . Find the total capacitance.
Parallel part.
Series with the 4 μF.
Answer
.
Examiner tip
Reduce step by step — identify series/parallel groups and combine.
(a) State the SI base units of the farad.
(b) Show the dimensional check is consistent.
(a) F = C V⁻¹ = (A s)/(J C⁻¹) = (A s · C)/J. Using and :
(b) Dimensional check: C × V = (C/V) × V = C ✓. Dimensions of charge.
Answer
(a) . (b) has units of charge ✓.
Examiner tip
Rarely asked for base units, but dimensional consistency is a sanity check for all formulae.
A parallel-plate capacitor has plate area and plate separation , with vacuum between.
(a) Find using .
(b) If connected to , find .
(c) State what happens to if is halved. (.)
(a)
(b)
(c) . Halving ⟹ doubles to .
Answer
(a) . (b) . (c) Halving doubles .
Examiner tip
Insert a dielectric (e.g. plastic) between plates and increases by factor (relative permittivity). Water: — hence water-filled capacitors store huge charge.
These worked examples are written by Tutopiya to cover the same syllabus content as the official Cambridge International AS & A Levels 9702 specification (2025-2027). They are exam-style questions, not reproductions of past paper questions.