Cambridge International AS & A Levels Physics 9702 · Standard · Syllabus 2025-2027
Characteristics of alternating currents Worked ExamplesA Level Physics 9702
Exam-style 9702 practice on AC: sinusoidal I/V waveforms, peak and RMS values (Irms=I0/2), mean power ⟨P⟩=21I0V0. Items span definitions (Foundation), peak/RMS/period calculations (Standard), and power dissipation in resistors (Challenge). Syllabus 21.1 (2025–2027).
This page has 10 exam-style A Level Physics 9702 characteristics of alternating currents worked examples — 3 Foundation, 4 Standard and 3 Challenge. Each one shows the full method step by step, the final answer in the form a marker expects, and an examiner tip on where marks are commonly lost.
Example 1FoundationIdentify & classify[2 marks]
Define peak current
State what is meant by the peak value of an alternating current.
1
The maximum value of current reached during one complete cycle of oscillation.
Answer
Maximum current reached in one cycle; symbol I0.
Examiner tip
Peak = amplitude of the sinusoid. Don't confuse with 'peak-to-peak' which equals 2I0.
Example 2FoundationIdentify & classify[2 marks]
AC equation
Write the equation for a sinusoidal alternating current in terms of time, with peak I0 and angular frequency ω.
1
I(t)=I0sin(ωt)
Answer
I=I0sin(ωt).
Examiner tip
Phase constant may be included: I=I0sin(ωt+ϕ). ω=2πf.
Example 3FoundationDirect calculation[3 marks]
Peak from RMS
Mains voltage in a region has RMS value 230V. Find the peak voltage.
1
V0=2Vrms=2×230≈325V
Answer
V0≈325V.
Examiner tip
Insulation must be rated for the PEAK, not the RMS — hence '230 V' lines carry 325 V peak.
Example 4StandardDirect calculation[3 marks]
Period and frequency
An AC has ω=100πrad s−1. Find (a) frequency, (b) period.
1
(a)
f=ω/(2π)=100π/(2π)=50Hz
2
(b)
T=1/f=1/50=0.020s=20ms
Answer
(a) f=50Hz. (b) T=20ms.
Examiner tip
UK/EU mains = 50 Hz; US mains = 60 Hz.
Example 5StandardDirect calculation[4 marks]
RMS from peak
An AC has peak current I0=6.0A. Find the RMS current.
1
Irms=I0/2=6.0/1.414≈4.24A
Answer
Irms≈4.24A.
Examiner tip
Only valid for sinusoidal AC. Non-sinusoidal signals need different relations.
Example 6StandardMulti-step problem[5 marks]
Mean power
An AC source with V0=50V, I0=2.0A (in phase). Find (a) mean power, (b) peak power.
1
(a)
⟨P⟩=21I0V0=21(2.0)(50)=50W
2
(b)
Ppeak=I0V0=(2.0)(50)=100W
Answer
(a) 50 W (mean). (b) 100 W (peak).
Examiner tip
Mean power = half of peak power for sinusoidal AC in resistive circuit.
Example 7StandardMulti-step problem[6 marks]
RMS and heat dissipation
A 100Ω resistor carries AC with peak current 0.50A. Find (a) peak power, (b) mean power, (c) RMS current.
RMS values are defined so that Irms2R gives the mean DC-equivalent power.
Example 8ChallengeIdentify & classify[7 marks]
RMS definition rationale
(a) Explain why RMS values of AC are used in preference to peak or average.
(b) Show that for sinusoidal AC, Irms=I0/2.
1
(a) The simple time-average of a pure sinusoid is zero (positive and negative halves cancel). RMS value is defined so that it gives the DC equivalent for heat dissipation: an AC with Irms dissipates the same power in a resistor as a DC with that same magnitude.
2
(b) For I=I0sinωt, I2=I02sin2ωt. The time-average of sin2 over a cycle is 1/2.
Irms2=⟨I2⟩=21I02⟹Irms=I0/2
Answer
(a) RMS gives DC-equivalent heating power; mean would be zero. (b) ⟨sin2⟩=1/2 ⟹ Irms=I0/2.
Examiner tip
The 1/2 factor arises specifically for pure sinusoids. Square waves give Irms=I0. Different waveforms, different ratios.
(a) 8.7 A rms. (b) 12.3 A peak. (c) 325 V peak. (d) 26.4 Ω.
Examiner tip
Appliance power ratings use RMS values. Protection devices (fuses, breakers) sized for RMS current.
Example 10ChallengeMulti-step problem[10 marks]
Oscilloscope reading
An AC signal on an oscilloscope shows peak-to-peak amplitude of 8.0V (vertical scale 2 V/div, 4 div peak-to-peak). Horizontal scale: 5 ms/div, 4 div per cycle. Find:
(a) peak voltage,
(b) RMS voltage,
(c) period,
(d) frequency.
1
(a)
V0=Vp-p/2=8.0/2=4.0V
2
(b)
Vrms=V0/2=4.0/1.414≈2.83V
3
(c)
T=4×5ms=20ms
4
(d)
f=1/T=1/0.020=50Hz
Answer
(a) 4.0 V peak. (b) 2.83 V rms. (c) 20 ms. (d) 50 Hz.
Examiner tip
Classic oscilloscope reading exam Q: amplitude from vertical scale, period from horizontal scale.
These worked examples are written by Tutopiya to cover the same syllabus content as the official Cambridge International AS & A Levels 9702 specification (2025-2027). They are exam-style questions, not reproductions of past paper questions.