Prediction. The rate will be highest in red and blue light and lowest in green light, because chlorophylls absorb red and blue light and reflect most green light.
Independent variable. Wavelength — use at least five coloured filters (e.g. red, orange, yellow, green, blue, violet) placed between the lamp and the plant.
Standardising light intensity. Filters transmit different amounts of light, so measure the intensity at the plant with a light meter and adjust the lamp distance until it is the same for every filter.
Dependent variable. Collect the gas released over a fixed time (e.g. 10 minutes) in a syringe or capillary tube and measure its volume; calculate rate in mm³ min⁻¹.
Standardised variables.
- CO₂: same volume of sodium hydrogencarbonate at the same concentration (e.g. 1%) so that CO₂ is in excess.
- Temperature: tube in a water bath at e.g. 25 °C, checked with a thermometer; heat shield in front of the lamp.
- Plant: the same piece of Cabomba (same length, e.g. 5 cm) for all colours.
- Background light: darkened room.
Acclimatisation. Leave the plant for 5 minutes under each filter before collecting gas.
Control. A tube in darkness (covered with foil) to show the rate of gas release with no light.
Reliability. Three readings for each colour, calculate a mean; use the filters in a random order so the plant's condition changing over time does not bias one colour.
Risk. Keep water away from the lamp's electrics; do not touch the hot bulb. Low risk.