Prediction. Stomatal aperture will increase as light intensity increases, then level off at high light intensity.
Independent variable. Light intensity — at least five values, e.g. 0 (dark), 100, 200, 400, 800 and 1600 μmol photons m⁻² s⁻¹ (or equivalent lux values), set with a dimmable LED lamp and checked at leaf level with a light meter.
Pre-treatment. Keep all plants in the dark for the same time (e.g. 2 hours) so that all stomata start closed, then place each plant at its light intensity for the same time (e.g. 60 minutes).
Dependent variable — impressions. Paint a small patch of clear nail varnish on the lower epidermis, let it dry for about 5 minutes, lift it off with clear adhesive tape and stick it onto a microscope slide.
Measuring aperture. Calibrate an eyepiece graticule with a stage micrometer and measure the width of each stomatal pore in μm.
Standardised variables (plants). Same species, same age, well watered, leaves at the same position on the plant, impressions taken from the same region of the leaf (e.g. midway between midrib and edge).
Standardised variables (environment). Same temperature (e.g. 25 °C, using LED lamps which produce little heat, and checked with a thermometer), same humidity and CO₂ concentration (all in the same controlled growth room), same time of day.
Replicates. At least three plants per light intensity, one impression per plant, and at least 10 stomata measured per impression, chosen at random; calculate the mean aperture for each light intensity.
Data processing. Plot mean aperture against light intensity with range bars or standard deviation.
Risk assessment. Nail varnish is highly flammable and gives off a harmful vapour — use in a well-ventilated room away from flames (medium risk, reduced to low). Lamps and electrical equipment — keep water away from sockets (low risk).